P115W-D - Kisan Headlight Modulator for GL1800
P115W-D unit is designed for a motorcycle with dual 3-pin H4, or a Japanese H7 2-pin style headlamps. It's 1.50" (38mm) round, and requires only 0.6" (15mm) of additional room after it's plugged on the back of the bulb. P115W-D unit is totally self-contained. There are no hidden boxes or switches. There are no wires to cut or splice.
PathBlazer circuit modulates the hi-beam current - from 100% ON to about 17% OFF. This is accomplished by using a p-channel MOSFET, which is inherently safe. The MOSFET is designed to fail in the ON state. For additional safety, the circuit DOES NOT utilize the lo-beam whatsoever! MAX power rating is 115 watts.
P115W-D comes with a detachable daylight sensor, which simply plugs into the PathBlazer. The daylight sensor functions as a switch; it stops modulation when it cannot see enough daylight. Since the internal circuitry is controlled by a microprocessor, which allows for customizable features. Programmable Daylight Sensor If you turn the high beam on and then turn the ignition on three times quickly, the sequence is interpreted as an active command to change the sensitivity. The daylight sensor has a low frequency filter to avoid false triggering. Please note that florescent lamps may not trigger the sensor - it needs constant incandescent light.
- For 3-pin H4, or a Japanese H7 2-pin style Dual Headlights
- Increases Motorcycle's Frontal Visibility by 200%
- Easy Plug and Play Installation
- Programmable Daylight Sensor
We Also Recommend